• Ensure that the surface is clean and free from dampness, dirt and other contamination.  
• Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall.  
• For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process.  
• Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.  

• Ensure that fresh walls are coated with one or two coats of white cement.  
• Apply 1 to 2 coats of Wall Primer Interior with an interval of 3 – 4 hrs between subsequent coats.
• Undulations in the wall can be levelled using any good quality acrylic putty or cement powder putty
• Putty should be used between the first and second coat of Wall Primer Interior and sanding of the putty shall be done as per recommendation
• Sanding of the second coat of Wall Primer Interior can be done using #320 Sandpaper.  
• Topcoat can be applied after an interval of 3 – 4 hrs of the second coat of Wall Primer Interior. 

Stir well before thinning the Paint

Mix 35 – 40% of potable water