Experience The Magic of Colour

PREMIUM WATER BASED POLYURETHANE WALL FINISH FOR INTERIORS

Pack Sizes

  • 1 Ltr, 4 Ltrs,10 Ltrs,20 Ltrs

1100 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- Eco-friendly Lead Content - Less than 90 PPM

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Thinning

  • Stir well before thinning the Paint

  • Mix 30 - 35% of potable water

Application Procedure

Ensure that fresh walls are coated with one or two coats of white cement

Apply 2 coats of AquaFresh Wall Primer with an interval of 4 - 5 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty

Putty should be used between the first and second coat of AquaFresh Wall Primer and sanding of the putty shall be done as per recommendation

Apply 2 coats AquaFresh interior wall finish with an interval of 4 to 5 hours between subsequent coats, after subjecting the second coat of AquaFresh Wall Primer to sanding using #320 Sandpaper

Sanding of the top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen color. Darker shades may require additional coats

PREMIUM 2-in-1 WATER BASED ACRYLIC EMULSION FOR INTERIORS/EXTERIORS

Pack Sizes

  • 1 Ltr, 4 Ltrs,10 Ltrs,20 Ltrs

1110 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- Eco-friendly Lead Content - Less than 90 PPM

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Thinning

  • Stir well before thinning the Paint

  • Mix 30 - 40% of potable water

Application Procedure

Ensure that fresh walls are coated with one or two coats of white cement

Apply 2 coats of ALTURA Wall Primer with an interval of 3 - 4 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty

Putty should be used between the first and second coat of ALTURA Wall Primer and sanding of the putty shall be done as per recommendation

Apply 2 coats ALTURA Emulsion with an interval of 4 to 5 hours between subsequent coats, after subjecting the second coat of ALTURA Wall Primer to sanding using #320 Sandpaper

Sanding of the top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen color

Darker shades may require additional coats

ECONOMICAL WATER BASED ACRYLIC EMULSION FOR INTERIORS

Pack Sizes

  • 1 Ltr, 4 Ltrs,10 Ltrs,20 Ltrs

937 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- Eco-friendly Lead Content - Less than 90 PPM

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Thinning

  • Stir well before thinning the Paint

  • Mix 40 - 45% of potable water

Application Procedure

Ensure that fresh walls are coated with one to two coats of white cement

Apply 2 coats of Wall Primer Interior with an interval of 3 – 4 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement powder putty

Putty should be used between the first and second coat of Wall Primer Interior . Sanding of the putty shall be done as per recommendation

Apply 2 coats of Visa Interior Emulsion with an interval of 4 to 5 hours between subsequent coats, after subjecting the second coat of Wall Primer Interior to sanding with #320 Sandpaper

Sanding of the first coat of top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen colour

Darker shades may require additional coats

PREMIUM WATER BASED POLYURETHANE WALL FINISH FOR EXTERIORS

Pack Sizes

  • 1 Ltr,4 Ltrs,10 Ltrs and 20 Ltrs

1014 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- UV Resistance depends on Shade

- Algae/Fungi Growth subject to conditions

- Eco-friendly Lead Content - Less than 90 PPM

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination

For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days

Thinning

  • Stir well before thinning the Paint

  • Mix 30 - 35% of potable water

Application Procedure

Ensure that fresh walls are coated with one or two coats of white cement

Apply 1 to 2 coats of AquaFresh Wall Primer with an interval of 4 - 5 hrs between subsequent coats

Apply 2 coats AquaFresh exterior wall finish with an interval of 5 to 6 hours between subsequent coats, after subjecting to first / second coat of AquaFresh Wall Primer to sanding using #320 Sandpaper

Sanding of the top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen color. Darker shades may require additional coats

PREMIUM 2-in-1 WATER BASED ACRYLIC EMULSION PAINT FOR INTERIORS/EXTERIORS

Pack Sizes

  • 1 Ltr,4 Ltrs,10 Ltrs and 20 Ltrs

1110 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- Algae/Fungi Growth subject to conditions

- UV Resistance : relative to colour

- Eco-friendly Lead Content - Less than 90 PPM

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination

For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days

Thinning

  • Stir well before thinning the Paint

  • Mix 30 - 35% of potable water

Application Procedure

Ensure that fresh walls are coated with one or two coats of white cement

Apply 1 to 2 coats of AquaFresh Wall Primer with an interval of 4 - 5 hrs between subsequent coats

Apply 2 coats AquaFresh exterior wall finish with an interval of 5 to 6 hours between subsequent coats, after subjecting to first / second coat of AquaFresh Wall Primer to sanding using #320 Sandpaper

Sanding of the top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen color. Darker shades may require additional coats

ECONOMICAL WATER BASED ACRYLIC EMULSION FOR EXTERIORS

Pack Sizes

  • 1 Ltr,4 Ltrs,10 Ltrs and 20 Ltrs

919 Shades

Features

  • 5 - Best in Class

  • 4 - Very Good

  • 3 - Good

  • 2 - Average

  • 1 - Poor

- Eco-friendly Lead Content - Less than 90 PPM

- UV Resistance : relative to colour

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination.

For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Thinning

  • Stir well before thinning the Paint

  • Mix 40 - 45% of potable water

Application Procedure

Ensure that fresh walls are coated with one to two coats of white cement before initiating the painting process

Apply 1 – 2 coats of Wall Primer Exterior with an interval of 3 – 4 hrs between subsequent coats

Sanding of the first / second coat of Wall Primer Exterior can be done using #320 Sandpaper

Apply 2 coats of Campus Exterior Emulsion with an interval of 4 to 5 hours between subsequent coats. Sanding of the first coat of top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen colour

Darker shades may require additional coats

Register your purchase details

  • Upload Invoice Copy