FreshWood Interior
Solvent based wood finish
Two pack solvent based Polyurethane clear wood finish for Interiors
100% PU
Available in Glossy and Matt Finishes
Moisture Resistance
Safeguard your furniture with moisture-resistant wood finish, preventing swelling, warping, and damage.
Stain Resistance
Keep your wooden furniture looking pristine with stain-resistant finish, protecting against oil, water, ink, and food stains.
Heat Resistance
Protect wood surfaces from heat-related damage like hot cookware or mugs with heat-resistant finishes, ensuring durability.
Enhanced Gloss Retention
Maintain a brilliant shine with enhanced gloss retention, ensuring your wood furniture stays glossy and beautiful over time.
- The raw wooden surface to be coated should be clean, dry, free from moisture ,dampness and other contamination
- For hard wood, sand the surface using sandpaper #80, followed by sandpapers #120, #150, #180 and #220
- For Veneer ply surfaces,start with sandpaper #220
- Always sand in the direction of the wood grain
- Mix the base thoroughly before mixing with the hardener.
- Avoid applying in direct sunlight or when humidity is very high.
- Apply 2 to 3 coats of FRESHWOOD PU Interior Sealer Clear, with an interval of 2-3 hours between subsequent coats. Sanding should be done before applying each coat. The number of coats may vary depending on the wood’s absorption.
- #220 sandpaper can be used for the first coat, and #400 sandpaper can be used for the second and third coats.
- Apply 2 coats of either FRESHWOOD PU Interior Glossy Clear or Matt Clear, depending on the requirement, with an interval of 5 hours between subsequent coats. Sanding after the first coat of the topcoat should be done with #600 or #1000 sandpaper.
- MRF Woodstains Interior shades can be used to enhance the color of the wood grain. The available shades can be used over either the first or second coat of sealer clear. Sanding after applying the shade is not permitted.
- For interior applications, use Woodstains Interior shades only.
Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 – 45 psi
- Thinner Recommended – Thinner for finish
| Freshwood Int.Sealer Clear | 10 – 15% |
| Freshwood Int.Glossy Clear | 20 – 25% |
| Freshwood Int.Matt Clear | 8 – 10% |
DOWNLOAD DATA SHEET
Fill the form to access the Data Sheet:
Other Products
About FreshWood Interior
FreshWood Interior is MRF Paints’ two-pack polyurethane clear finish for interior wood. It is 100% PU and keeps the wood grain visible while protecting against moisture, heat, scratches and stains, with good gloss retention. It dries fast and sands easily, and it comes in glossy or matt.
Where to use it
- Indoor furniture, wall panelling, rails and fences
Key facts
- Two-pack polyurethane clear interior wood finish (1:1 by volume)
- Finishes: glossy and matt, over FreshWood Interior Sealer Clear
- Coverage: 75-80 sq ft per litre per coat at 35 microns (data sheet)
- Tack free in 1 hour; hard dry in 8 hours
- Thinner for Finish: sealer 10-15%, glossy 20-25%, matt 8-10%
- Conventional spray; packs of 1 L, 4 L and 20 L
FAQs
How do I apply FreshWood Interior?
Make sure the wood is clean, dry and free from moisture. For hardwood, sand with #80, then #120, #150, #180 and #220; for veneer ply, start at #220. Always sand along the grain. Apply one coat of MRF Epoxy Isolant Sealant. Then apply 2-3 coats of FreshWood Interior Sealer Clear, about 2 hours apart, sanding before each coat (#220 first, then #400). Finish with 2 coats of Glossy or Matt Clear, 5 hours apart, sanding the first with #600.
Can I add colour to the wood grain?
Yes. MRF Woodstains Interior shades can be applied over the first or second coat of Sealer Clear. Do not sand after applying the stain.
How much does one litre cover?
About 75-80 sq ft per litre per coat, according to the MRF data sheet. It varies with the application method and how absorbent the wood is.
What is the difference between FreshWood Interior and FreshWood Exterior?
Both are two-pack PU clear wood finishes. FreshWood Exterior is made for outdoor wood, with better UV resistance and longer recoat times.
How long should it dry?
It is tack free in about 1 hour and hard dry in 8 hours. Apply between 25 and 40 degrees C, with humidity below 75%.
Where can I buy it?
Through authorised MRF Paints dealers. Use the MRF Paints dealer locator.
Specifications
| Type | Two-pack solvent-based polyurethane clear wood finish |
|---|---|
| Recommended use | Interior wood |
| Finish | Clear, glossy or matt |
| Recoat interval | 2-3 hours |
| Thinning | 10-15% |
| Pack sizes | 1 L, 4 L, 20 L |
Coverage depends on surface texture and application method; figures are from the MRF technical data sheet. Download the data sheet (PDF).
16 prime Colour Palette
Brush up on our blogs!
September 16, 2026
Colours That Bring Warmth and Light to Your Home This Monsoon
READ ARTICLE
September 16, 2026
How to Paint a Metal Door: A Step-by-Step Guide for a Smooth Finish
READ ARTICLE
September 2, 2026
5 Trending Colours to Paint Old Wooden Furniture
READ ARTICLE
September 2, 2026
New Home Checklist: Colours, Finishes and First Impressions for Your Dream House
READ ARTICLE
August 25, 2026
Matte Black Magic: Why Black Is the Best Colour for Metal Doors and Railings
READ ARTICLEGET IN TOUCH
Fill the form to book a consultation:
