
Altura 2-in-1 Acrylic Emulsion
Premium 2-in-1 Wall Paint
Water based Acrylic Emulsion paint for Interior and Exterior Walls

Greenpro Certified

Eco-Friendly

6 years warranty

1110 Nebula Shades

Low Odour
Breathe better in a fresher indoor environment with low-odour paint, ensuring a clean, comfortable space without the discomfort of unpleasant smells.

High Durability
Ensure your interior walls look flawless for years with high durability, resisting wear, scratches, and environmental damage.

Best in Class Washability
Experience unmatched washability, allowing your walls to stay spotless and vibrant despite repeated cleaning.

Best in Class Coverage
Achieve maximum efficiency with superior coverage, reducing the need for multiple coats and delivering a flawless, long-lasting finish.
- Ensure that the surface is clean and free from dampness, dirt and other contamination
- For areas severely affected by algae and fungi, ensure that the surface is completely cleaned with Bio-wash before initiating the painting process
- Sand the surface using #180 sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall.
- Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
- Available in matte and sheen finishes. (Application: Exterior Walls)
- Apply 1-2 coats of Altura Wall Primer with an interval of 4-5 hours between subsequent coats.
- Sanding of first and second coat of Altura Wall Primer can be done with sandpaper #320.
- Apply 2 coats of Abura Emulsion with an interval of 4-5 hours between subsequent coats.
- Sanding of the topcoat can be done with sandpaper #600.
INTERIOR WALLS - Ensure that fresh walls are coated with one or two coats of white cement.
- Apply 2 coats of Abura Wall Primer with an interval of 4-5 hours between subsequent coats.
- Undulations in the wall can be levelled MRF VILASA Wall putty.
- Putty should be used between the first and second coat of Altura Wall Primer and sanding of the putty shall be done as per recommendation.
- Apply 2 coats Abura Emulsion with an interval of 4-5 hours between subsequent coats, after subjecting the second coat of Altura Wall Primer to sanding using sandpaper #320.
- Sanding of the topcoat can be done with sandpaper #600. •The number of coats of topcoats depends on the chosen colour. Darker shades may require additional coats.
Conventional Spray, Nozzle Orifice: 0.059 inches,
Pressure: 35-45 psi.
Thinner Recommended – Thinner for Finish (TFF)
THINNER INTAKE % |
---|
10 – 15% |

Greenpro certificate
We meet the requirements of GreenPro Ecolabel and qualify as Green Product.