• Ensure that the surface is clean and free from dampness, dirt, and other contamination.
• For areas severely affected by algae and fungi, ensure that the surface is completely cleaned with Bio-wash before initiating the painting process.
• Sand the surface using Sandpaper #180 and clean thoroughly. Ensure that no loose particles are sticking to the wall.
• Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

• Apply 2 coats of Aquafresh PU Wall Primer with an interval of 4-5 hours between subsequent coats.
• Apply 2 coats AquaFresh Interior wall finish with an interval of 4 to 5 hours between subsequent coats, after subjecting
  second coat of AquaFresh PU Wall Primer to sanding using Sandpaper #320.
• Sanding of the topcoat can be done with Sandpaper #600.
• The number of topcoats depends on the chosen colour. Darker shades may require additional coats. 

Roller or Brush or Conventional Spray, Nozzle Orifice: 0.059 inches, Pressure: 35 – 45 psi.