MRF multi-purpose coatings are metal paints and topcoats for gates, grills, railings, doors and furniture, and also work on wood and other surfaces. The two-pack polyurethane (PU) finishes give the longest life outdoors: typically up to 8 years, against 3 to 4 years for synthetic enamel.
MetalCoat: luxury aliphatic two-pack PU topcoat for metal, wood and other surfaces, inside and out; corrosion protection for up to 8 years; 80 to 85 sq ft per litre per coat; 8 hours between coats; spray application highly recommended; 54 factory shades plus 3,000+ tinted shades.
MC+: two-pack PU multi-surface finish, salt spray test certified; 80 to 85 sq ft per litre per coat; 8 hours between coats; 2,000 shades.
Durothane: aliphatic two-pack PU that is easy to brush; 80 to 85 sq ft per litre per coat; 8 hours between coats; 29 factory shades plus 1,000+ tinted shades.
Specta PU Enamel: single-pack solvent-based PU enamel for metal and wood; 110 to 140 sq ft per litre per coat; 24 shades.
Acrylic Super Fine: single-pack metallic acrylic finish for multiple surfaces; 80 to 85 sq ft per litre per coat; 4 hours between coats.
Painting rusted metal: sand off loose rust, apply one coat of Epidec RTC (rust-tolerant) primer, then two coats of the topcoat. For colour ideas, see our guides to main gate colour combinations and metal colour shades for gates, grills and railings.


















