• Ensure that the surface is clean and free from dampness, dirt and other contamination.
• Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall.
• For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process
• Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

For Interior Walls: 

• Ensure that fresh walls are coated with one or two coats of white cement. 
• Apply 2 coats of AquaFresh Wall Primer with an interval of 4 – 5 hrs. between subsequent coats. 
• Undulations in the wall can be levelled using any good quality acrylic putty or cement-based putty. 
• Sanding of the first and second coat of Aquafresh Wall Primer can be done using #320 Sandpaper. 
• Topcoat can be applied after an interval of 4 – 5 hrs. of the second coat of AquaFresh Wall Primer. 

For Exterior Walls: 

• Ensure that fresh walls are coated with one or two coats of white cement. 
• Apply 1 to 2 coats of AquaFresh Wall Primer with an interval of 4 – 5 hrs between subsequent coats. 
• Sanding of the second coat of AquaFresh Wall Primer can be done using #320 Sandpaper. 
• Topcoat can be applied after an interval of 4 – 5 hrs of the second coat of AquaFresh Wall Primer. 

Stir well before thinning the Paint
Mix 35 – 45% of potable water