Melamine Aura
Solvent based wood finish
Two pack solvent based clear wood finish for Interiors
Available in Glossy and Matt Finishes
Best in class finish
Achieve superior quality at an affordable price with our premium economy wood finish.
- The coated surface should be clean, dry, and free from moisture, dampness, and other contaminants.
- For hardwood, sand the surface using sandpaper #80, followed by sandpapers #120, #150, #180, and #220.
- For veneer plywood surfaces, start with sandpaper #220.
- This step-by-step approach makes the surface smooth.
- Always sand in the direction of the wood grain.
- Mix the base thoroughly prior to mixing with the hardener
- Avoid applying in direct sunlight or when the humidity is very high
- Apply 2 to 3 coats of Melamine Sealer clear with an interval of 8 hrs between subsequent coats. Sanding should be done prior to the application of each coat. The number of coats varies depending on the absorption of wood
- #220 sandpaper can be used for the first coat and #400 sandpaper can be used for the second and third coats
- Apply 2 coats of either Melamine Glossy Clear or Matt Clear depending on the requirement, with an interval of 8 hrs between subsequent coats. Sanding of the 1st coat of top coat shall be done with #600 or #1000 sandpaper
- MRF Woodstains Interior shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear sanding of the applied shade is not permitted
- For Interior applications use Woodstains Interior shades only
- Manual Brush Application
- Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 – 45 psi
- Thinner Recommended – Thinner 3830
| Melamine Sealer Clear | 25 – 30% |
| Melamine Matt Clear | 25 – 30% |
| Melamine Glossy Clear | 25 – 30% |
DOWNLOAD DATA SHEET
Fill the form to access the Data Sheet:
Other Products
About Melamine Aura
Melamine Aura is MRF Paints’ two-pack, solvent-based melamine clear finish for interior wood. It is MRF’s economy wood finish, giving a smooth, durable, best-in-class finish at an affordable price, in glossy or matt.
Where to use it
- Interior furniture, doors and panelling where a clear economy finish is enough
Key facts
- Two-pack solvent-based melamine clear wood finish (base plus catalyst)
- Finishes: glossy and matt
- Thinner 3830: 25-30% for sealer, matt and glossy clear
- Brush or conventional spray
- Packs: 1 L, 4 L and 20 L
FAQs
How do I apply Melamine Aura?
Sand the wood smooth along the grain (hardwood from #80 to #220, veneer from #220). Apply 2-3 coats of Melamine Sealer Clear, 8 hours apart, sanding before each coat (#220, then #400). Finish with 2 coats of Melamine Glossy or Matt Clear, 8 hours apart.
Which thinner should I use?
MRF Thinner 3830, at 25-30% for the sealer and for both glossy and matt clear.
Can Melamine Aura be applied with a brush?
Yes, by brush or by conventional spray.
Is Melamine Aura suitable for outdoor wood?
It is an interior wood finish. For exterior wood, MRF offers WoodCoat Exterior and AquaCoat PU 2K.
Specifications
| Type | Two-pack solvent-based melamine clear wood finish |
|---|---|
| Recommended use | Interior wood |
| Finish | Clear, glossy or matt |
| Thinning | 25-30% |
| Pack sizes | 1 L, 4 L, 20 L |
Coverage depends on surface texture and application method; figures are from the MRF technical data sheet. Download the data sheet (PDF).
16 prime Colour Palette
Brush up on our blogs!
September 16, 2026
Colours That Bring Warmth and Light to Your Home This Monsoon
READ ARTICLE
September 16, 2026
How to Paint a Metal Door: A Step-by-Step Guide for a Smooth Finish
READ ARTICLE
September 2, 2026
5 Trending Colours to Paint Old Wooden Furniture
READ ARTICLE
September 2, 2026
New Home Checklist: Colours, Finishes and First Impressions for Your Dream House
READ ARTICLE
August 25, 2026
Matte Black Magic: Why Black Is the Best Colour for Metal Doors and Railings
READ ARTICLEGET IN TOUCH
Fill the form to book a consultation:
