- Mix the base (Part A) thoroughly before the addition of hardener (Part B). Ensure that the hardeneris slowly added to the base in the specified ratio.
- Add the recommended thinner after thoroughly mixing the base and hardener. The mixture should be used within its pot life.
- Ensure that the hardener is slowly added to the base in the specified ratio.
- For application details, please refer product data sheet in downloads menu
Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 – 45 psi
- Mix the base thoroughly prior to mixing with the hardener
Thinner Recommended
| Epoxy Zinc Phosphate Primer Grey/ Dark Grey | Thinner 1110 Ep |
| GMP Epoxy Red Oxide Red | Thinner 1110 Ep |
| Epoxy Primer Oxide Red/ Metal Grey/ Surfacer Grey | Thinner 1110 Ep |
| Epidec Epoxy RTC Primer Grey/ Zinc ph primer Grey | Thinner 1110 Ep |
Thinner Intake
| Epoxy Zinc Phosphate Primer Grey | 30 – 35% |
| Epoxy Zinc Phosphate Primer Dark Grey | 15 – 20% |
| GMP Epoxy Red Oxide Red | 15 – 20% |
| Epoxy Primer Oxide Red/ Metal Grey/ Surfacer Grey | 15 – 20% |
| Epidec Epoxy RTC Primer Grey | 3 – 5% |
| Epidec Epoxy Zinc ph primer Grey | 15 – 20% |
| Epoxy putty – white / Grey | 3 – 5% |
| Epidec Epoxy Matt | 10 – 15% |
| Epidec Epoxy Glossy | 15 – 20% |
| MRF Coal Tar Epoxy | 15 – 20% |
| Epidec Epoxy ROC Black | 3 – 5% |
DOWNLOAD DATA SHEET
Fill the form to access the Data Sheet:
Other Products
About Epidec
Epidec is MRF Paints’ range of premium two-pack epoxy coatings. It is made up of Epidec RTC (Rust Tolerant Coat) Primer and Epidec topcoat finishes.
Epidec RTC Primer is recommended for rusted metal surfaces. Epidec topcoats are recommended for interior application only.
Where to use it
- Rusted metal gates, grills and railings: Epidec RTC Primer under a topcoat
- Interior metal surfaces: Epidec topcoats
Key facts
- Two-pack epoxy system: base (Part A) and hardener (Part B)
- Epidec RTC Primer: one coat on rusted metal after sanding off loose rust
- Topcoats over Epidec RTC Primer: Acrylic Super Fine, Durothane or Durothane Hues, MetalCoat or MC+, or Epidec
- Epidec topcoats: interior use only
- Packs: 500 ml, 1 L, 4 L and 20 L
FAQs
What does Epidec RTC Primer do?
RTC stands for Rust Tolerant Coat. It is made to go on rusted metal: sand and remove the loose rust particles, then apply one coat of Epidec RTC Primer.
Which topcoat should I use over Epidec RTC Primer?
You can use Acrylic Super Fine, Durothane or Durothane Hues, MetalCoat or MC+, or an Epidec topcoat.
Can Epidec topcoats be used outdoors?
No. Epidec topcoats are recommended for interior application only. For outdoor gates and railings, use Epidec RTC Primer under a topcoat such as MetalCoat, MC+ or Durothane.
How do I mix Epidec?
Mix the base (Part A) thoroughly, then slowly add the hardener (Part B) in the specified ratio. Add the recommended thinner after mixing, and use the mixture within its pot life.
Where can I get Epidec?
Through authorised MRF Paints dealers. Use the MRF Paints dealer locator, or contact MRF for industrial requirements.
Specifications
| Type | Two-pack epoxy primer (Epidec RTC) and interior topcoats |
|---|---|
| Recommended use | Rusted metal (RTC primer); interior metal (topcoats) |
| Thinning | 30-35% |
| Pack sizes | 1 L, 4 L, 20 L, 500 ml |
Coverage depends on surface texture and application method; figures are from the MRF technical data sheet.
16 prime Colour Palette
Brush up on our blogs!
September 16, 2026
Colours That Bring Warmth and Light to Your Home This Monsoon
READ ARTICLE
September 16, 2026
How to Paint a Metal Door: A Step-by-Step Guide for a Smooth Finish
READ ARTICLE
September 2, 2026
5 Trending Colours to Paint Old Wooden Furniture
READ ARTICLE
September 2, 2026
New Home Checklist: Colours, Finishes and First Impressions for Your Dream House
READ ARTICLE
August 25, 2026
Matte Black Magic: Why Black Is the Best Colour for Metal Doors and Railings
READ ARTICLEGET IN TOUCH
Fill the form to book a consultation:
