• The raw wooden surface to be coated should be clean, dry and free from moisture, dampness and other contamination.
• For hardwood, sand the surface using sandpaper #80, followed by sandpapers #120, #150, #180 and #220.
For veneer, start with sandpaper #220.
• Always sand in the direction of the wood grain.

AVAILABLE IN GLOSSY & MATT FINISHES

• Mix the base thoroughly prior to mixing with the hardener.
• Avoid applying in direct sunlight or when the humidity is very high.
• Apply 2 to 3 coats of WoodCoat Italia Interior Sealer Clear/ Filler White with an interval of 2-3 hours between
  subsequent costs.
• Sanding should be done prior to the application of each coat. • sandpaper #220 can be used for the first coat and
  sandpaper #400 can be used for the second and third coats, number of coats of sealer required varies from 2 to 3 depending on the absorption of wood.
• Apply 2 to 3 coats coats of either WoodCoat Italia Interior High Gloss Clear/Matt Clear/ High Gloss White / Matt White depending on the requirement, with an interval of 5 hours between subsequent coats. Sanding of the first coat shall be done using sandpaper #600.
• MRF Woodstains Interior shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of Sealer Clear. Sanding after application of Woodstains is not recommended.
• For interior applications use Woodstains Interior shades only.

Conventional Spray, Nozzle Orifice: 0.059 inches,
Pressure: 35-45 psi.

Thinner Recommended – Thinner for Finish (TFF)